INFO CENTER
Concentrating on manufacturing metal wire bending machine for more than 10 years in China
Language
Concentrating on manufacturing metal wire bending machine for more than 10 years in China
1、 Single end wire bending machine :
The rotary head machine, as the name suggests, is a device that rotates the working head, does not rotate the steel wire, and forms a three-dimensional angle. The representatives of this type of equipment are the French Numan from Europe and America, the OMECG from Italy, and the mature and reliable Huiting 580 machine made in China. The characteristic of the turntable machine is that it is suitable for making products such as large wire warp and rod components. The stability is very good, and if equipped with a high-speed motor, the production speed will also be very fast. The structure of the rotary head machine is very intuitive, and debugging is very convenient. It will be the mainstream model of wire forming equipment in the future.
2、 Flat wire forming machine :
The meaning of a tablet machine is that there is one or two tablets at the front of the processing area, which support the machine in the process of forming products and play a lifting role. This structure is suitable for the production of framework products because there is a platform to support its stability. Of course, the production of small and short products is also very suitable. If the wire is too thick, above 7.0mm, it is recommended to use a rotating head instead.
3、 Camless wire forming machine :
The Camless wire forming machine was originally a computer spring machine because it is a fully servo CNC equipment with 8-10 servo motors on the panel, with a relatively high degree of automation. It is very suitable for the production of some small and complex products. Making springs is his basic function, and forming irregular lines also has obvious automation advantages.
