How to maintain the 2d wire bending machine ?

Maintaining the machine on time has a significant impact on the service life of the machine, so this is very important.

How to maintain the 2d wire bending machine ?

1. Correct installation and placement

After the 2d wire bending machine is placed in the workshop, sufficient grounding is required. During transportation, if the manufacturer has wooden boards with bottom pads, they need to remove the boards and place rubber pads on them to prevent vibration during the production process of the wire forming machine.

2. Regularly add oil and butter

The main locations for refueling are curls, wire feeding boxes, and transmission gears. For a long time, there should be oil lubrication at the running-in area of the wire forming machine. Generally, the grease should be checked once a week.

3. Keep the machine clean

Before leaving work every day, employees need to wipe the surface of the wire forming machine clean. If left uncleaned for a long time and oil stains accumulate, there is a possibility of changes in circuit parameters, as well as long-term erosion of dust, which can age the surface of the 2d wire bending machine and affect its aesthetics.

4. Normal operation and use

Pay special attention to not producing products beyond the wire diameter range as much as possible to avoid reducing the accuracy of the equipment. The machine needs to be placed in a ventilated and dry place to prevent moisture, rust, or damage to the circuit. Being able to maintain the machine in a timely and attentive manner can not only maintain the accuracy and stability of the wire forming machine, extend its service life, but also reduce the repair rate of the machine.